Cómo encontrar la electronegatividad: Guía de la Escala Pauling
Para aprender cómo encontrar la electronegatividad, comience con el valor de Pauling impreso para cada elemento en una tabla periódica: flúor 3.98, oxígeno 3.44, carbono 2.55, sodio 0.93. También se puede calcular a partir de las energías de enlace (método de Pauling) o de la energía de ionización y la afinidad del electrón (método Mulliken).

What does electronegativity mean?
Electronegativity is how strongly an atom pulls the shared pair of electrons towards itself when it is in a covalent bond. It is not something you can measure directly on a single atom, like mass or charge. It is a comparison: one atom pulls harder than the other, and the shared electrons spend more of their time near it.
That is what "what does electronegativity mean" boils down to for an exam answer: the ability of an atom in a molecule to attract the bonding electrons to itself. Because it is a ratio-style comparison, Pauling values have no units.
Two things set the pull:
- Nuclear charge. More protons pull harder, as long as the bonding electrons are not much further away.
- Distance and shielding. Bonding electrons in an outer shell far from the nucleus, with many inner shells in between, feel a weaker pull.
How to find electronegativity on the periodic table
Most of the time you do not calculate anything. You look the number up.
- Find the element on a periodic table that lists electronegativity values (most data booklets have one).
- Read the number under or beside the symbol. These are almost always Pauling values.
- Do the same for the other atom in the bond.
- Subtract the smaller value from the larger. This difference, written Δχ (delta chi), is what tells you about the bond.
Here are the electronegativity values periodic table charts give for the elements you meet most often:
| Element | Symbol | Pauling electronegativity |
|---|---|---|
| Fluorine | F | 3.98 |
| Oxygen | O | 3.44 |
| Chlorine | Cl | 3.16 |
| Nitrogen | N | 3.04 |
| Bromine | Br | 2.96 |
| Sulfur | S | 2.58 |
| Carbon | C | 2.55 |
| Hydrogen | H | 2.20 |
| Magnesium | Mg | 1.31 |
| Sodium | Na | 0.93 |
| Potassium | K | 0.82 |
| Caesium | Cs | 0.79 |
Fluorine is the most electronegative element. The pattern behind the numbers (higher towards the top right, lower towards the bottom left) is covered on our periodic table trends page. Noble gases such as helium and neon are usually left blank, because they hardly form bonds at all.
What is the Pauling scale of electronegativity?
The Pauling scale of electronegativity is the scale the American chemist Linus Pauling published in 1932. He noticed that a bond between two different atoms, A–B, is usually stronger than the average of the A–A and B–B bonds. The extra strength comes from the uneven sharing of electrons, so the bigger the extra energy, the bigger the difference in electronegativity.
Pauling only fixed differences, so he needed a reference point. Fluorine is now set at 3.98 and every other element is placed relative to it.
How to calculate electronegativity from bond energies
If a question asks how to calculate electronegativity rather than look it up, it usually means Pauling's equation:
Δχ = √(extra bond energy in eV)
where the extra bond energy = E(A–B) − ½ [E(A–A) + E(B–B)].
Worked example: hydrogen chloride
Mean bond energies: H–H = 436 kJ/mol, Cl–Cl = 242 kJ/mol, H–Cl = 431 kJ/mol.
- Average of the two pure bonds: (436 + 242) ÷ 2 = 339 kJ/mol.
- Extra energy in H–Cl: 431 − 339 = 92 kJ/mol.
- Convert to electronvolts (1 eV per particle = 96.5 kJ/mol): 92 ÷ 96.5 = 0.95 eV.
- Square root: √0.95 = 0.98.
So chlorine is about 0.98 more electronegative than hydrogen. The table values give 3.16 − 2.20 = 0.96, which agrees well. If you know hydrogen is 2.20, you have just found chlorine's electronegativity: about 3.18.
How to determine electronegativity with the Mulliken method
The American physicist Robert Mulliken suggested a second way in 1934. He took the average of two energies you can measure for a free atom:
χ (Mulliken) = (first ionisation energy + electron affinity) ÷ 2
An atom that holds on to its own electrons tightly (ionisation energy) and also releases a lot of energy when it gains one (electron affinity) will pull hard on shared electrons too. Mulliken values come out in electronvolts and are bigger numbers, so they are scaled before being compared with Pauling values. For school chemistry, Pauling values are the ones you are expected to use.
How to use the difference to predict bond type
Once you have Δχ, use it as a rough guide. Textbooks draw the lines in slightly different places, so treat these as approximate:
| Δχ | Bond type | Example |
|---|---|---|
| 0 to about 0.4 | Nonpolar covalent | C–H (0.35), Cl–Cl (0) |
| about 0.4 to 1.7 | Polar covalent | O–H (1.24), H–Cl (0.96) |
| above about 1.7 | Mostly ionic | Na–Cl (2.23), K–F (3.16) |
In a polar bond, the more electronegative atom gets a small negative charge (δ−) and the other a small positive charge (δ+). In water, oxygen is δ− and each hydrogen is δ+, which is what allows hydrogen bonds to form between molecules. For a full comparison of the two bond types, see ionic vs covalent bonds.
Common mistakes
- Adding units. Pauling electronegativity has no units. Writing "3.98 eV" is wrong.
- Mixing it up with electron affinity. Electron affinity is an energy change for a lone gaseous atom; electronegativity describes an atom inside a bond.
- Forgetting to subtract. One value on its own says nothing about a bond. You always need the difference.
- Treating 1.7 as a hard wall. Bond character changes gradually. H–F has Δχ of 1.78 but is still a covalent molecule.
- Mixing scales. Do not subtract a Mulliken value from a Pauling value.
Frequently asked questions
Which element has the highest electronegativity?
Fluorine has the highest electronegativity, 3.98 on the Pauling scale. It has a small atom with only two shells, and its nine protons pull strongly on bonding electrons that sit close to the nucleus with little shielding. Oxygen (3.44) and chlorine (3.16) come next among the common elements. Caesium and francium, at the bottom left of the periodic table, have the lowest values, around 0.7 to 0.8.
Does electronegativity have units?
No. Pauling electronegativity values are pure numbers with no units, because they come from comparing bond energies and the scale is fixed relative to fluorine at 3.98. Mulliken's version starts from energies measured in electronvolts, but the values are normally scaled to match Pauling's numbers before use. In an exam, write the value on its own, such as "oxygen has an electronegativity of 3.44".
How do you find the electronegativity difference?
Look up the Pauling value for each atom in the bond on a periodic table or data sheet, then subtract the smaller from the larger. For an O–H bond, 3.44 − 2.20 = 1.24, so the bond is polar covalent with oxygen slightly negative. A difference near zero means a nonpolar bond, and a difference above about 1.7 suggests the bond is mostly ionic.
Why do noble gases not have electronegativity values?
Electronegativity describes how strongly an atom attracts electrons in a bond, and helium, neon and argon form no stable compounds, so there is no bond to measure. Pauling values therefore leave them blank. Krypton and xenon do form a few compounds with fluorine and oxygen, so some tables give them values, for example about 2.6 for xenon.
Try it yourself
Open the interactive periodic table, pick two elements that form a bond you know (sodium and chlorine, or hydrogen and oxygen) and note their electronegativity values. Work out the difference and use the table above to decide whether the bond is ionic, polar or nonpolar. Then build the molecule in the Molecule Builder and see how the atoms join.
Véalo por sí mismo, en 3D y gratis.
Pruébalo en el Tabla Periódica Interactiva