Sciencedemy
☰✕

What Is Atomic Mass? Units, Formula and Examples

Atomic mass is the mass of one atom, measured in atomic mass units (u). For a single isotope it is very close to the number of protons plus neutrons. The periodic table value is the weighted average of an element’s naturally occurring isotopes, which is why it is rarely a whole number. Chlorine, for example, is 35.45 u.

What Is Atomic Mass? Units, Formula and Examples: Interactive Periodic Table: Colour-coded periodic table of all 118 elements grouped into metals, non-metals and noble gases
The Interactive Periodic Table in 3D: open it and try this yourself, free.
Try it in the Interactive Periodic Table

What is the atomic mass unit?

The atomic mass unit, symbol u (also called the dalton, Da), is defined as exactly one twelfth of the mass of a carbon-12 atom. In kilograms, 1 u = 1.66054 × 10⁻²⁷ kg. Atoms are so light that grams would be awkward, so chemists use u instead.

Because the unit is built on carbon-12, that isotope has a mass of exactly 12 u. Everything else is measured against it:

Particle Mass (u)
Proton 1.00728
Neutron 1.00866
Electron 0.000549

An electron is about 1/1836 of a proton, so almost all the mass of an atom sits in the nucleus. That is why the mass number (protons + neutrons) is a good whole-number guide to the mass of one isotope.

Why is the atomic mass of carbon 12.011 and not 12?

The atomic mass of carbon on the periodic table is 12.011 because natural carbon is a mixture. About 98.9% of carbon atoms are carbon-12 (exactly 12 u) and about 1.1% are carbon-13 (13.003 u). A trace of carbon-14 is present too, but it is far too small to change the value. The average sits just above 12.

Two things are easy to mix up here:

  • Isotopic mass: the mass of one particular isotope, such as 34.969 u for chlorine-35.
  • Relative atomic mass (Ar): the weighted average mass of an element's atoms compared with one twelfth of carbon-12. It has no unit, because it is a ratio. Numerically it equals the figure on the periodic table.

If you need to refresh what an isotope is, see what is an isotope.

What is the average atomic mass formula?

The average atomic mass formula multiplies each isotope's mass by its fractional abundance and adds the results:

Average atomic mass = (mass₁ × abundance₁) + (mass₂ × abundance₂) + …

Write each percentage as a decimal (75.76% becomes 0.7576) so the abundances add up to 1.

Worked example: chlorine

Chlorine has two main isotopes:

Isotope Mass (u) Abundance
Chlorine-35 34.969 75.76%
Chlorine-37 36.966 24.24%
  1. Chlorine-35: 34.969 × 0.7576 = 26.49
  2. Chlorine-37: 36.966 × 0.2424 = 8.96
  3. Add them: 26.49 + 8.96 = 35.45 u

That matches the 35.45 on the periodic table. Notice that no chlorine atom has a mass of 35.45. The number is an average, like saying a class has 2.4 siblings per student when nobody has 0.4 of a sibling.

Worked example: copper

Copper has two stable isotopes: copper-63 (62.930 u, 69.15%) and copper-65 (64.928 u, 30.85%).

(62.930 × 0.6915) + (64.928 × 0.3085) = 43.52 + 20.03 = 63.55 u

Going backwards

Exam questions often give the average and one abundance and ask for the other. Call the abundance of one isotope x and the other 1 − x, then solve. Boron, for instance, has an atomic mass of 10.81 and two isotopes, boron-10 (10.013 u) and boron-11 (11.009 u). Setting 10.013x + 11.009(1 − x) = 10.81 gives x = 0.200, so about 20% is boron-10 and 80% is boron-11.

How is atomic mass different from mass number?

The two are close but not the same thing. Use this table to keep them apart.

Atomic mass Mass number
What it counts Mass in u Protons + neutrons
Whole number? Usually not Always
Applies to An element (average) or one isotope One isotope
Example Chlorine: 35.45 Chlorine-35: 35

The mass number is a count, so it is always a whole number. The atomic mass is a measurement, and it comes out slightly off a whole number even for one isotope because of the mass defect: when a nucleus forms, a little mass is converted into the binding energy that holds it together (E = mc²). That is why a helium-4 nucleus is lighter than two protons and two neutrons on their own.

What is atomic mass used for?

  • Molar mass. The atomic mass in u is the same number as the molar mass in g/mol. Carbon's 12.011 u means one mole of carbon weighs 12.011 g. Add the atomic masses of every atom in a formula to get the molar mass of a compound, as described in what is a mole.
  • Mass spectrometry. A mass spectrometer separates isotopes by mass, and the heights of the peaks give the abundances used in the average atomic mass formula.
  • Why the table is not in mass order. Argon (39.95) comes before potassium (39.10) because the table is ordered by atomic number, the number of protons, not by mass.

Common mistakes

  • Rounding too early. Keep at least four significant figures until the final answer, or chlorine drifts away from 35.45.
  • Using percentages directly. Multiplying by 75.76 instead of 0.7576 gives an answer 100 times too big.
  • Averaging the isotope masses without weighting. (34.969 + 36.966) ÷ 2 = 35.97, which is wrong because chlorine-35 is three times more common.
  • Calling atomic mass a count of particles. Only the mass number counts particles.
  • Putting a unit on relative atomic mass. Ar is a ratio, so it has no unit; the atomic mass in u does.

Frequently asked questions

What is the atomic mass of carbon?

The atomic mass of carbon is 12.011 u. Carbon-12, which makes up about 98.9% of natural carbon, is defined as exactly 12 u, and about 1.1% is carbon-13 at 13.003 u. The weighted average of the two comes out just above 12. For quick GCSE calculations, using 12 is normal; use 12.011 when your course asks for more significant figures.

Is atomic mass the same as atomic weight?

In everyday chemistry the two terms are used for the same number, the average mass of an element's atoms shown on the periodic table. Strictly, "relative atomic mass" is the name now preferred by IUPAC, and "atomic weight" is the older term. Both describe a ratio to one twelfth of carbon-12, so neither has a unit.

Why is atomic mass not a whole number?

There are two reasons. First, most elements are a mixture of isotopes, so the periodic table value is an average. Second, even a single isotope is not exactly a whole number, because protons and neutrons differ slightly in mass and some mass is lost as binding energy when the nucleus forms. Carbon-12 is a whole number only because the unit is defined that way.

How do you find the atomic mass of an element?

For an element with known isotopes, multiply each isotope's mass by its abundance as a decimal and add the results. For a quick answer, read the number under the symbol on the periodic table. To work out neutrons from it, round to a whole number and subtract the atomic number, as in how to find neutrons, protons and electrons.

Try it yourself

Open the Interactive Periodic Table and click chlorine to see its atomic mass of 35.45. Then open the Atom Builder, add 17 protons and 18 neutrons to make chlorine-35, and note the mass number. Swap in 20 neutrons to make chlorine-37 and see how the mass number changes while the element stays the same. Finish with the average atomic mass formula on your own numbers: a 3 to 1 mix of the two isotopes should land close to 35.5.

See it for yourself, in 3D and free.

Try it in the Interactive Periodic Table