Transition Metals Periodic Table: d-Block Properties
On a transition metals periodic table, the transition metals are the wide central block between group 2 and group 13, covering groups 3 to 12. They include iron, copper, nickel, silver and gold. Most are hard, dense and strong, form coloured compounds, have more than one ion charge and make useful catalysts.

Where are the transition metals on the periodic table?
Find calcium in group 2 and gallium in group 13. Everything in between, from period 4 downwards, is the d-block. The first row runs scandium, titanium, vanadium, chromium, manganese, iron, cobalt, nickel, copper and zinc. The rows below add elements such as silver, platinum, gold and mercury.
What is the d block periodic table region?
The d block periodic table region is named after the orbital being filled. Across the first row, electrons go into the 3d sub-shell, which holds up to 10 electrons, so there are 10 elements per row. Iron, for example, is [Ar] 3d⁶ 4s². Two well-known exceptions are chromium ([Ar] 3d⁵ 4s¹) and copper ([Ar] 3d¹⁰ 4s¹), where a half-full or full d sub-shell is slightly more stable. You can practise writing these in how to find electron configuration.
The two rows usually printed below the main table, the lanthanides and actinides, are the f-block. They are sometimes called the inner transition metals.
Is every d-block element a transition metal?
Not under the strict definition. IUPAC defines a transition element as one whose atom has a partly filled d sub-shell, or which forms ions with a partly filled d sub-shell. Zinc fails both tests: the atom is 3d¹⁰ 4s² and its only ion, Zn²⁺, is 3d¹⁰. So zinc, cadmium and mercury are d-block metals but often not counted as transition metals. Many A-level courses also leave out scandium, because its only ion, Sc³⁺, has an empty d sub-shell.
What are the properties of transition metals?
The properties of transition metals split into physical ones they share with other metals and chemical ones that make them special.
Physical properties
- High melting points. Iron melts at 1538 °C and tungsten at 3422 °C, the highest of any metal. Mercury is the odd one out: it melts at −39 °C and is a liquid at room temperature.
- High density. Iron is 7.87 g/cm³ and osmium, at about 22.6 g/cm³, is the densest element known.
- Hard and strong, which is why iron, chromium, nickel and titanium are used in steels and alloys.
- Good conductors of heat and electricity. Silver is the best electrical conductor of all, and copper is used for wiring because it conducts almost as well and costs far less.
Chemical properties
- More than one ion charge. Iron forms Fe²⁺ and Fe³⁺; copper forms Cu⁺ and Cu²⁺; manganese has oxidation states from +2 up to +7. This is why compound names carry Roman numerals, such as iron(III) oxide.
- Coloured compounds (see the next section).
- Catalytic activity.
- Complex ions. They bond to surrounding molecules or ions called ligands, as in [Cu(H₂O)₆]²⁺, the blue ion in copper sulfate solution.
Transition metals vs alkali metals
Comparing a transition metal with a group 1 metal makes the difference clear. The group 1 side is explained in full in alkali metals periodic table.
| Property | Iron (transition metal) | Sodium (alkali metal) |
|---|---|---|
| Melting point | 1538 °C | 98 °C |
| Density | 7.87 g/cm³ | 0.97 g/cm³ |
| Hardness | Hard and strong | Soft, cuts with a knife |
| Ions | Fe²⁺ and Fe³⁺ | Na⁺ only |
| Colour of compounds | Pale green (Fe²⁺), orange-brown (Fe³⁺) | White |
| Reaction with cold water | Rusts slowly with air and water | Fizzes vigorously |
Why are transition metal compounds coloured?
So, why are transition metal compounds coloured? When ligands surround a transition metal ion, its five d orbitals split into two groups with slightly different energies. A d electron can absorb a photon of visible light and jump to the higher group. The light absorbed is removed from white light, and we see the colour that is left over.
Copper(II) ions absorb mostly red and orange light, so their solutions look blue. Ions with an empty or full d sub-shell, such as Sc³⁺ and Zn²⁺, have no electron that can make this jump, so their compounds are white. Common colours to learn:
| Ion | Colour in water |
|---|---|
| Cu²⁺ | Blue |
| Fe²⁺ | Pale green |
| Fe³⁺ | Yellow to orange-brown |
| Ni²⁺ | Green |
| Co²⁺ | Pink |
| Cr³⁺ | Green to violet |
| MnO₄⁻ | Purple |
These colours are also the basis of the hydroxide precipitate tests: adding sodium hydroxide gives a blue precipitate with Cu²⁺, green with Fe²⁺ and orange-brown with Fe³⁺.
How do transition metals act as catalysts?
Transition metals as catalysts work for two reasons. Their surfaces can hold reacting molecules in place, weakening their bonds, and their ability to switch between oxidation states lets them pass electrons on and then return to where they started. Important examples:
- Iron in the Haber process, making ammonia from nitrogen and hydrogen.
- Vanadium(V) oxide, V₂O₅, in the Contact process for sulfuric acid.
- Nickel for hydrogenating vegetable oils to make margarine.
- Platinum, palladium and rhodium in car catalytic converters.
A catalyst speeds up a reaction without being used up, by giving a route with a lower activation energy, an idea explained in exothermic and endothermic reactions.
Common mistakes
- Counting all of groups 3 to 12 as transition metals. Under the strict definition zinc is not one.
- Removing 3d electrons before 4s when forming an ion. Fe²⁺ is [Ar] 3d⁶, not [Ar] 3d⁴ 4s².
- Thinking the metal itself is coloured. It is the ions in compounds that show colour; iron metal is grey.
- Assuming one fixed charge. Always check the Roman numeral or work the charge out from the formula.
Frequently asked questions
How many transition metals are on the periodic table?
The d-block holds about 40 elements: ten in each of periods 4, 5, 6 and 7, across groups 3 to 12. The exact number of transition metals depends on the definition used. Under the strict IUPAC rule, zinc, cadmium and mercury are left out because they never have a partly filled d sub-shell, and some courses also exclude scandium.
What is the difference between transition metals and inner transition metals?
Transition metals are the d-block elements in groups 3 to 12, where the d sub-shell is being filled. Inner transition metals are the lanthanides and actinides, the two rows printed below the main table, where the 4f and 5f sub-shells fill. They are separated only to keep the periodic table from becoming too wide to print.
Why do transition metals have variable oxidation states?
The 4s and 3d electrons are very close in energy, so a transition metal can lose different numbers of them without a huge jump in energy. Iron can lose its two 4s electrons to form Fe²⁺, or one more 3d electron as well to form Fe³⁺. Manganese can use all seven of its 4s and 3d electrons to reach +7.
Is iron a transition metal?
Yes. Iron is in group 8 and period 4, in the middle of the d-block. Its atom is [Ar] 3d⁶ 4s², and both of its common ions, Fe²⁺ and Fe³⁺, have partly filled d sub-shells. It shows every typical property: a high melting point, coloured compounds, two ion charges and use as a catalyst in the Haber process.
Try it yourself
Open the Periodic Table and click across the first row of the d-block from scandium to zinc, checking each electron configuration and noting where chromium and copper break the pattern. Then open iron and copper to compare their melting points and ion charges with sodium. Finally, in the Chemistry Lab, add sodium hydroxide to copper sulfate and watch the blue precipitate form.
See it for yourself, in 3D and free.
Try it in the Interactive Periodic Table