Effective Nuclear Charge Trend: Zeff and Slater's Rules
The effective nuclear charge trend is simple to state: Zeff increases from left to right across a period and stays roughly the same going down a group (more careful calculations show a small rise). Effective nuclear charge is the net positive pull an outer electron actually feels, once the inner electrons have cancelled part of the nucleus.

What is nuclear charge?
Nuclear charge is the total positive charge of the nucleus. It equals the number of protons, which is the atomic number Z. Sodium has 11 protons, so its nuclear charge is +11; chlorine has 17, so its nuclear charge is +17.
An outer electron never feels that full charge. Electrons in the inner shells sit between it and the nucleus and repel it, cancelling part of the attraction. This is called shielding (or screening). The charge that is left over is the effective nuclear charge, written Zeff or Z*.
What is the effective nuclear charge formula?
The effective nuclear charge formula is:
Zeff = Z − S
- Z is the atomic number (the number of protons).
- S is the shielding constant: roughly how many protons' worth of charge the other electrons cancel.
There are two ways to find S, and which one you use depends on your course.
The simple model: count the inner electrons
At GCSE and in many introductory courses, S is taken as the number of core electrons, the electrons in full inner shells. Each one is assumed to cancel exactly one proton, and the outer electrons are assumed to cancel nothing.
For sodium (2, 8, 1): Zeff = 11 − 10 = +1. For chlorine (2, 8, 7): Zeff = 17 − 10 = +7.
In this model Zeff is the same as the number of valence electrons for main-group elements. It is a rough estimate, but it gets the direction of every trend right.
Slater's rules
Slater's rules, published by John C. Slater in 1930, give a better value of S. Write the electron configuration in these groups: (1s) (2s, 2p) (3s, 3p) (3d) (4s, 4p) (4d) (4f) (5s, 5p) and so on. Then, for an electron in an s or p orbital, add up:
| Other electrons | Contribution to S, each |
|---|---|
| In the same (ns, np) group | 0.35 (0.30 if the electron is in 1s) |
| In the shell one below (n − 1) | 0.85 |
| In shells two or more below (n − 2 and lower) | 1.00 |
| In any group to the right (higher shells) | 0 |
For an electron in a d or f orbital, the other electrons in the same group count 0.35 and every electron in a group to its left counts 1.00.
Worked example: oxygen
Oxygen has 8 electrons: (1s)² (2s, 2p)⁶. Take one of the 2p electrons.
- Other electrons in the (2s, 2p) group: 5 × 0.35 = 1.75
- Electrons in the shell below (1s): 2 × 0.85 = 1.70
- S = 1.75 + 1.70 = 3.45
- Zeff = 8 − 3.45 = 4.55
So an outer electron in oxygen feels a pull of about +4.55, not the full +8.
Why does effective nuclear charge increase across a period?
Across a period, Zeff increases because each step adds one proton to the nucleus but the new electron goes into the same shell. Electrons in the same shell are poor at shielding each other, so most of the extra proton's pull reaches the outer electrons.
Slater's rules show this clearly. Each step along period 2 adds 1 to Z but only 0.35 to S, so Zeff goes up by 0.65 every time:
| Element | Li | Be | B | C | N | O | F | Ne |
|---|---|---|---|---|---|---|---|---|
| Zeff (Slater) | 1.30 | 1.95 | 2.60 | 3.25 | 3.90 | 4.55 | 5.20 | 5.85 |
More accurate values, worked out from atomic wavefunctions by Enrico Clementi and Daniel Raimondi in 1963, follow the same pattern: about 1.28 for lithium and 5.10 for fluorine.
What is the Zeff trend down a group?
On a Zeff trend periodic table, the values down a group are roughly flat. Going from one period to the next adds a whole new shell, and the protons added are almost exactly balanced by the extra inner electrons that shield them.
The simple model gives +1 for every group 1 metal (lithium 3 − 2, sodium 11 − 10, potassium 19 − 18). Slater's rules give 1.30 for lithium and 2.20 for both sodium and potassium. Clementi's values rise gently instead: about 1.28 for lithium, 2.51 for sodium and 3.50 for potassium.
Whichever numbers you use, the outer electron is also much further from the nucleus in each new period. Distance wins, so the pull on the outer electron gets weaker down a group even though Zeff does not fall.
How does effective nuclear charge explain other trends?
Zeff is the reason behind most periodic trends, and you can use it in exam answers instead of vague phrases about "stability".
- Atomic radius decreases across a period because a larger Zeff pulls the same shells in closer. The atomic radius periodic table article gives the real values in picometres.
- Ionisation energy rises across a period because the outer electron is held by a larger Zeff at a smaller distance. Down a group it falls, because distance and extra shells win. See the ionization energy periodic table for the data.
- Electronegativity follows the same path as ionisation energy, peaking at fluorine (3.98 on the Pauling scale).
- Ion sizes: O²⁻, F⁻, Na⁺ and Mg²⁺ all have 10 electrons, but their nuclear charges are +8, +9, +11 and +12. Their radii fall from about 140 pm to 133, 102 and 72 pm as the nucleus gets stronger.
Common mistakes
- Confusing nuclear charge with effective nuclear charge. Nuclear charge is just Z and always rises with atomic number. Zeff is Z minus the shielding.
- Saying Zeff increases a lot down a group. It stays roughly level; the trend down a group is driven by distance and the number of shells.
- Letting outer electrons shield fully. Electrons in the same shell shield each other weakly (0.35 each in Slater's rules), not by a whole proton.
- Forgetting to leave out the electron itself. In Slater's rules you count the other electrons in the group, so oxygen's 2p electron has 5 neighbours, not 6.
Frequently asked questions
Which element has the highest effective nuclear charge?
For the outer electrons, Zeff is largest for the noble gases at the right of each period and grows slowly down the table, so heavy p-block elements have the biggest values. Within any one period the noble gas has the highest Zeff and the alkali metal the lowest. Neon's outer electrons feel about +5.8 by Slater's rules, compared with +1.3 for lithium in the same period. Inner electrons feel far more: a 1s electron in any heavy atom feels almost the full nuclear charge.
Why do electrons in the same shell shield each other so poorly?
Electrons in the same shell spend much of their time at the same distance from the nucleus as each other, and often on different sides of it. So one is not reliably between the nucleus and the other. An inner electron is almost always closer to the nucleus, so it cancels nearly a whole proton's worth of charge. That is why Slater gives 0.35 for a same-shell electron and 0.85 or 1.00 for inner ones.
Is effective nuclear charge the same as the number of valence electrons?
Only in the simple core-electron model, where Zeff = Z − core electrons. That gives +1 for sodium and +7 for chlorine, matching their valence electrons. Real shielding is incomplete, so better values are higher than the simple ones for metals and lower for non-metals: Slater's rules give 2.20 for sodium and 6.10 for chlorine. Use the simple version at GCSE and Slater's rules when your course asks for them.
How do you calculate Zeff for an ion?
Use the same formula, Zeff = Z − S, but with the ion's electron count. Na⁺ has 11 protons and 10 electrons, (1s)² (2s, 2p)⁸. For a 2p electron: 7 × 0.35 + 2 × 0.85 = 4.15, so Zeff = 11 − 4.15 = 6.85. That is far higher than the 2.20 felt by the 3s electron in a neutral sodium atom, which is why Na⁺ is so much smaller than Na.
Try it yourself
Open the Atom Builder and build sodium with 11 protons and 11 electrons. Count the electrons in the inner shells and subtract them from the protons to get the simple Zeff of +1. Now add six more protons and electrons to make chlorine: the inner shells stay the same, so the simple Zeff jumps to +7 and the outer shell is pulled tighter. Finish on the Periodic Table with the Atomic radius trend switched on, and watch the atoms shrink across period 3 as Zeff climbs.
See it for yourself, in 3D and free.
Try it in the Atom Builder