Ionization Energy Periodic Table: Trends and Exceptions
On an ionization energy periodic table, the values rise from left to right across each period and fall from top to bottom down each group. So the hardest atoms to ionise sit at the top right (helium, neon, fluorine) and the easiest at the bottom left (caesium).

What is ionisation energy?
The first ionisation energy is the energy needed to remove one mole of electrons from one mole of gaseous atoms, making one mole of gaseous ions with a 1+ charge. For sodium the change is:
Na(g) → Na⁺(g) + e⁻
Three details in that definition matter in exams. The atoms must be gaseous, so that no bonds or forces between atoms get mixed into the number. The electron removed is always the outermost one, the one held least tightly. And the value is always positive, because pulling a negative electron away from a positive nucleus always takes energy.
Values are given in kJ/mol. Physicists often quote the same thing per atom in electronvolts (eV); 1 eV per atom equals 96.485 kJ/mol, so hydrogen's 13.6 eV is 1312 kJ/mol.
What is the first ionization energy trend?
The first ionization energy trend has two parts: it increases across a period and decreases down a group. Both come from how strongly the nucleus holds the outer electron, which depends on three things:
- Nuclear charge: more protons pull harder.
- Distance: an electron further from the nucleus feels a weaker pull.
- Shielding: inner electrons sit between the nucleus and the outer electron and cancel part of the pull.
Across a period
Going from sodium to argon, each element has one more proton, but the new electron goes into the same shell. The extra inner shielding is small, so the outer electrons feel a bigger net pull and sit closer in. More energy is needed to remove one.
| Period 3 element | Na | Mg | Al | Si | P | S | Cl | Ar |
|---|---|---|---|---|---|---|---|---|
| First ionisation energy (kJ/mol) | 496 | 738 | 578 | 786 | 1012 | 1000 | 1251 | 1521 |
Argon, a noble gas, has the highest value in the period. That is one reason noble gases hardly react.
Down a group
Each step down a group adds a whole new shell. The outer electron is further away and has more inner electrons shielding it. The extra protons do not make up for this, so the electron is easier to remove.
| Group 1 element | Li | Na | K | Rb | Cs |
|---|---|---|---|---|---|
| First ionisation energy (kJ/mol) | 520 | 496 | 419 | 403 | 376 |
Why does ionisation energy decrease down a group?
Ionisation energy decreases down a group because the outer electron is in a shell further from the nucleus, with more filled shells shielding it. The attraction it feels is weaker, so less energy is needed to remove it. This is also why the alkali metals get more reactive from lithium to caesium: each one gives up its electron more easily.
The same idea explains why halogens get less reactive down group 17. A halogen reacts by gaining an electron, and a bigger atom attracts that incoming electron less strongly.
Why are there exceptions to the trend?
Look at the period 3 table again: the numbers do not rise smoothly. There are two dips, and the same two appear in period 2.
| Period 2 element | Li | Be | B | C | N | O | F | Ne |
|---|---|---|---|---|---|---|---|---|
| First ionisation energy (kJ/mol) | 520 | 899 | 801 | 1086 | 1402 | 1314 | 1681 | 2080 |
The dip from group 2 to group 13
Boron (801) is lower than beryllium (899), and aluminium (578) is lower than magnesium (738). The electron removed from boron is in a 2p orbital, which is slightly higher in energy than the 2s and is partly shielded by the 2s electrons. It is a little further out and less tightly held. You can see which orbital each electron is in by working out the electron configuration.
The dip from group 15 to group 16
Oxygen (1314) is lower than nitrogen (1402), and sulfur (1000) is lower than phosphorus (1012). Nitrogen's three 2p electrons are each in a separate orbital. Oxygen's fourth 2p electron has to share an orbital with another electron, and the two repel each other. That repulsion makes one of them easier to remove.
What are successive ionisation energies?
Successive ionisation energies are the energies to remove the first, second, third electron and so on, one at a time. Each one is larger than the last, because every electron is being pulled away from an ion that is already more positive.
The useful part is where the jumps are. For sodium: 496, then 4562, then 6910 kJ/mol. The huge jump after the first electron shows that sodium has one electron in its outer shell; the second has to come from the full inner shell, much closer to the nucleus. For magnesium the big jump comes after the second electron (738, 1451, then 7733 kJ/mol), so magnesium is in group 2.
Exam questions often give a list of successive energies and ask for the group. Find the biggest jump: the number of electrons removed before it is the number of valence electrons, which gives the group.
How is ionisation energy linked to other trends?
Ionisation energy goes hand in hand with size. Across a period atoms shrink and become harder to ionise; down a group they grow and become easier to ionise. The atomic radius periodic table article covers the size side of the same story. Electronegativity follows the same direction as ionisation energy, which is why fluorine and oxygen pull hard on shared electrons while metals on the left give electrons away to form positive ions, as shown in how do ions form.
Common mistakes
- Forgetting "gaseous". The definition needs gaseous atoms and gaseous ions; writing Na(s) loses the mark.
- Saying the second ionisation energy removes two electrons. It removes the second electron only, from a 1+ ion.
- Explaining the boron and oxygen dips with "stability of a half-full shell" alone. Say which orbital the electron comes from and mention the paired-electron repulsion for oxygen.
- Mixing up the directions. Ionisation energy rises across a period and rises going up a group; atomic radius goes the opposite way.
Frequently asked questions
Which element has the highest ionisation energy?
Helium has the highest first ionisation energy of any element, 2372 kJ/mol. Its two electrons are in the first shell, very close to the nucleus, with no inner electrons to shield them from the two protons. Neon (2080 kJ/mol) and fluorine (1681 kJ/mol) come next. Every noble gas has the highest value in its own period, which matches how unreactive they are.
Which element has the lowest ionisation energy?
Caesium has the lowest first ionisation energy of the elements that can be studied in bulk, about 376 kJ/mol. Its single outer electron is in the sixth shell, far from the nucleus and shielded by 54 inner electrons. That is why caesium reacts explosively with water and is used in photoelectric cells, where light alone can knock electrons out of it.
Why is the second ionisation energy always bigger than the first?
After the first electron has gone, the particle is a positive ion. The remaining electrons are still attracted by the same number of protons but there are fewer electrons repelling each other, so each one is held more tightly and sits a little closer to the nucleus. Removing the next electron therefore takes more energy every time.
Is ionisation energy the same as electron affinity?
No. Ionisation energy is the energy needed to remove an electron from a gaseous atom, so it is always positive. Electron affinity is the energy change when a gaseous atom gains an electron, and for most non-metals it is negative because energy is released. Both are measured in kJ/mol, and both tend to be biggest in size for small non-metal atoms near the top right of the table.
Try it yourself
Open the Periodic Table and choose First ionisation energy from the trend menu. Every tile gets a bar and a value in eV, so you can see the tallest bars on the right and the shortest at the bottom left. Then click beryllium and boron, and nitrogen and oxygen, and compare their values in kJ/mol on the element card to find the two dips for yourself.
See it for yourself, in 3D and free.
Try it in the Interactive Periodic Table