Metals on Periodic Table: Location and Properties
The metals on periodic table charts fill everything to the left of the staircase line that runs from boron down to astatine: groups 1 and 2, the whole central block, the lower part of groups 13 to 16 and the two rows of lanthanides and actinides.

Where are metals on the periodic table?
Where are metals on the periodic table? Start at boron and follow the zigzag line down through silicon, germanium, antimony and polonium towards astatine. The elements touching the line are the metalloids. Every element to the left and below them is a metal, apart from hydrogen, which sits above group 1 but is a gas and a nonmetal.
The metals fall into five families.
| Family | Where | Examples | Typical ion |
|---|---|---|---|
| Alkali metals | Group 1 | lithium, sodium, potassium | +1 |
| Alkaline earth metals | Group 2 | magnesium, calcium, barium | +2 |
| Transition metals | Groups 3–12 (d-block) | iron, copper, silver, gold | variable, e.g. Fe²⁺ and Fe³⁺ |
| Post-transition metals | Groups 13–16, below the line | aluminium, tin, lead, bismuth | +3 for Al, +2 or +4 for Sn and Pb |
| Lanthanides and actinides | The two rows under the table (f-block) | cerium, neodymium, uranium | mostly +3 |
Each family has its own article: the alkali metals and the transition metals are covered in detail.
How many metals are there?
How many metals are there? Usually about 95. Seventeen elements are counted as nonmetals and six (boron, silicon, germanium, arsenic, antimony and tellurium) as metalloids, which leaves 95 of the 118. The count is approximate because the heaviest elements, such as livermorium and tennessine, have only been made a few atoms at a time, so their metallic character is predicted rather than measured.
What are the properties of metals?
The properties of metals all come from the way their atoms are held together, so it is worth knowing the bonding first.
Metallic bonding in one paragraph
In a solid metal, each atom gives up its outer electrons to a shared pool. What is left is a regular lattice of positive ions surrounded by a sea of delocalised electrons that can move through the whole structure. The attraction between the positive ions and the electron sea is the metallic bond. The free electrons carry charge and heat, and because the bond has no fixed direction, layers of ions can slide over each other without the metal breaking.
Physical properties
- Good conductors of electricity and heat. Silver is the best electrical conductor of all; copper is close behind and much cheaper, so it is used for wiring.
- Malleable and ductile: they can be hammered into sheets and drawn into wires. One gram of gold can be beaten into a sheet about 1 m² in area.
- Shiny when freshly cut or polished, because the free electrons reflect light.
- High melting points and densities for most of them. Tungsten melts at 3422 °C, the highest of any metal, and osmium is the densest element at about 22.6 g/cm³.
- Sonorous: they ring when struck, which is why bells are made of bronze.
Chemical properties
- They lose electrons to form positive ions: Na⁺, Mg²⁺, Al³⁺.
- They form ionic compounds with nonmetals, such as sodium chloride and magnesium oxide. The difference from shared-electron bonds is set out in ionic vs covalent bonds.
- Their oxides are mostly basic. Sodium oxide dissolves in water to give sodium hydroxide, an alkali, and magnesium oxide neutralises acids. Aluminium oxide and zinc oxide are amphoteric: they react with both acids and bases.
- Many react with dilute acids to give a salt and hydrogen gas: magnesium + hydrochloric acid → magnesium chloride + hydrogen.
Which metals break the rules?
The general properties hold for most metals, but a few exceptions turn up again and again in exams.
| Metal | Exception | Value |
|---|---|---|
| Mercury | Liquid at room temperature | melts at −39 °C |
| Gallium | Melts in your hand | melts at 29.8 °C |
| Caesium | Melts on a warm day | melts at 28.5 °C |
| Lithium | Floats on water | density 0.53 g/cm³ |
| Sodium, potassium | Soft enough to cut with a knife | densities 0.97 and 0.86 g/cm³ |
| Gold, copper | Coloured, not silvery | yellow and reddish |
How does metallic character change across the table?
Metallic character means how easily an atom gives up its outer electrons. It follows two trends:
- It increases down a group. The outer electrons are further from the nucleus and shielded by more inner shells, so they are lost more easily. Potassium reacts with water more violently than sodium, which reacts more than lithium.
- It decreases across a period from left to right. The nuclear charge rises while the shell number stays the same, so the electrons are held more tightly. Sodium, magnesium and aluminium are metals; silicon is a metalloid; phosphorus, sulfur and chlorine are nonmetals.
Both trends are measured by the energy needed to remove an electron, described in ionisation energy on the periodic table.
What is the most reactive metal?
The most reactive metal that can be studied in bulk is caesium, at the bottom of group 1. Its first ionisation energy is only about 376 kJ/mol, and it explodes on contact with water. Francium, below it, should be even more reactive, but it is so radioactive that only tiny traces have ever existed at one time. At the other end, gold and platinum barely react at all, which is why gold jewellery stays bright for centuries.
A short reactivity series used in school is: potassium > sodium > calcium > magnesium > aluminium > zinc > iron > copper > silver > gold.
Common mistakes
- Forgetting that hydrogen is not a metal even though it sits in the group 1 column.
- Counting the metalloids as metals. Silicon looks shiny but is a semiconductor and brittle.
- Saying all metals are hard and dense. The alkali metals are soft and lithium floats.
- Saying metals have high melting points without the exceptions: mercury, gallium and caesium.
- Mixing up the trends: metals get more reactive down a group, nonmetals less reactive.
Frequently asked questions
Where are the metals located on the periodic table?
Metals are on the left side and in the middle of the periodic table, to the left of the staircase line from boron to astatine. They include groups 1 and 2, the transition metals in groups 3 to 12, the lower elements of groups 13 to 16 such as aluminium, tin and lead, and the lanthanides and actinides. Hydrogen is the only nonmetal on the left side.
What are 5 properties of metals?
Metals conduct electricity and heat, are malleable and ductile, are shiny when freshly cut, usually have high melting points and densities, and form positive ions by losing electrons. These properties come from metallic bonding: a lattice of positive ions held together by a sea of delocalised electrons that are free to move through the whole solid.
Is aluminium a metal or a metalloid?
Aluminium is a metal. It sits in group 13, just left of the staircase line, and it conducts electricity, is malleable and forms Al³⁺ ions. Boron, above it in the same group, is a metalloid. Aluminium is the most abundant metal in Earth's crust, about 8% by mass, and is used in drinks cans, foil and aircraft because it is light and resists corrosion.
Which element is the most metallic?
Francium should be the most metallic element, since it is at the bottom of group 1, where outer electrons are held most weakly. It is too radioactive to study in bulk, so caesium is the most metallic element in practice. Metallic character increases down a group and from right to left across a period, which places both of them in the bottom left corner.
Try it yourself
Open the Periodic Table and trace the staircase line from boron to astatine, then click a few elements on each side to compare their state and electron shells. Open sodium and caesium to see how many more shells caesium has. Then, in the Chemistry Lab, drop magnesium into hydrochloric acid and watch the hydrogen bubbles. Compare what you find with the nonmetals on the periodic table.
See it for yourself, in 3D and free.
Try it in the Interactive Periodic Table