Sciencedemy
☰✕

Sodium Lewis Dot Structure: Na, Na+ and Other Atoms

The sodium Lewis dot structure is simply the symbol Na with a single dot beside it: Na·. Sodium is in group 1, so it has one valence electron in its outer shell (electron arrangement 2,8,1), and a Lewis dot structure shows only those outer electrons.

Sodium Lewis Dot Structure: Na, Na+ and Other Atoms: Ions & Ionic Bonding: Sodium and chlorine ions as charged clouds packing into a sodium chloride crystal
The Ions & Ionic Bonding in 3D: open it and try this yourself, free.
Try it in the Ions & Ionic Bonding

What is a Lewis dot structure for an atom?

A Lewis dot structure (also called a Lewis symbol or electron dot diagram) for a single atom is the element's symbol surrounded by one dot for each valence electron, the electrons in the outermost shell. These are the electrons that take part in bonding, which is why chemists bother to draw them and leave the rest out. The idea comes from the American chemist Gilbert N. Lewis, who published it in 1916.

The symbol itself stands for the nucleus plus all the inner electrons. So the lewis dot structure for sodium has one dot, even though a sodium atom has 11 electrons altogether.

How to draw lewis dot structures for atoms

Here is how to draw lewis dot structures for atoms of any main-group element in four steps.

  1. Write the element's symbol, for example Na.
  2. Find the number of valence electrons from the group. Groups 1 and 2 have 1 and 2; groups 13 to 18 have the last digit of the group number (13 → 3, 17 → 7). Helium is the exception, with 2. Our guide to finding valence electrons explains why.
  3. Imagine four sides around the symbol: top, right, bottom and left.
  4. Place the dots one per side first, then go round again and pair them up, up to a maximum of 8 (two on each side).

The order you go round in does not matter, and some textbooks pair the first two dots together. What matters is the number of dots, and that unpaired dots show how many bonds an atom tends to form.

For sodium, step 2 gives 1, so you put a single dot on any side and stop.

Lewis dot structures of the first 18 elements

Group 1 2 13 14 15 16 17 18
Valence electrons 1 2 3 4 5 6 7 8
Period 2 Li Be B C N O F Ne
Period 3 Na Mg Al Si P S Cl Ar
Unpaired dots 1 2 3 4 3 2 1 0

Everything in one column has the same dot structure, just a different symbol. Sodium looks exactly like lithium and potassium, which is a quick way to see why the group 1 metals react in such similar ways.

Carbon lewis dot structure

Carbon is in group 14, so it has 4 valence electrons. The carbon lewis dot structure has one dot on each of the four sides and no pairs:

  ·
· C ·
  ·

Four unpaired dots means carbon can form four bonds, which is exactly what it does in methane, CH4.

Oxygen lewis dot structure

Oxygen is in group 16 with 6 valence electrons. After one dot on each side you have 2 left, so two sides get a second dot. The oxygen lewis dot structure has 2 pairs and 2 single dots:

  ··
: O ·
  ·

The two unpaired electrons are why oxygen usually forms two bonds, as in water, or gains two electrons to become the oxide ion, O²⁻.

Fluorine lewis dot structure

Fluorine is in group 17 with 7 valence electrons: three pairs and one single dot. The fluorine lewis dot structure looks like this:

  ··
: F ·
  ··

One unpaired electron means one bond. Fluorine needs just one more electron for a full octet, which is part of why it is the most reactive non-metal.

How do you draw the sodium ion, Na+?

A sodium atom loses its single outer electron very easily (its first ionisation energy is 496 kJ/mol, one of the lowest of any element). What is left is the sodium ion, Na⁺, with the arrangement 2,8. Its dot structure is drawn with no dots and the charge outside square brackets:

[Na]⁺

The old outer shell is now empty. The full second shell of 8 is usually left out, as the inner shells always are, though some textbooks show it as 8 dots inside the brackets. Both are accepted as long as the brackets and charge are shown.

How does sodium form NaCl in a dot diagram?

Sodium and chlorine show ionic bonding at its simplest. Sodium has 1 valence electron and chlorine has 7. Sodium transfers its electron to chlorine, so both end up with a full outer shell:

  • Before: Na· (1 dot) and Cl with 7 dots (three pairs and a single).
  • After: [Na]⁺ (no dots) and [Cl]⁻ with 8 dots, a pair on every side.

The resulting ions are held together by strong electrostatic attraction, and in a real crystal millions of them pack into a giant ionic lattice. Exams often ask you to draw this as a dot-and-cross diagram, with sodium's electron as a cross so you can follow where it went. There is more on this in how ions form.

Sodium can do the same with other non-metals. Oxygen needs two electrons, so it takes one from each of two sodium atoms to make sodium oxide, Na2O: 2[Na]⁺ [O]²⁻, with 8 dots on the oxide ion.

Common mistakes

  • Drawing all 11 electrons around Na. Only the outer electron is shown; the symbol stands for the rest.
  • Forgetting the brackets and charge on Na⁺. A bare "Na" with no dots looks like a neutral atom that has lost track of its electron.
  • Pairing dots too early on carbon, nitrogen or oxygen, which hides how many bonds the atom can make.
  • Drawing a shared pair between Na and Cl. NaCl is ionic: the electron is transferred, not shared, so there is no bond line.
  • Giving helium 8 dots because it is in group 18. Helium has only 2 electrons.

Frequently asked questions

Why does sodium only have one dot?

Sodium has one dot because only one of its 11 electrons is in the outer shell. Its electron arrangement is 2,8,1 (1s² 2s² 2p⁶ 3s¹), and a Lewis dot structure shows just the valence electrons, the ones involved in bonding. The 10 inner electrons are counted as part of the symbol Na. Every group 1 element, from lithium to caesium, has one dot for the same reason.

Does Na+ have any dots?

In most textbooks Na⁺ is drawn with no dots, as [Na]⁺. When sodium loses its one valence electron, its third shell is empty, so there are no outer electrons left to show. Some books draw the new full outer shell of 8 electrons as dots inside the brackets. Either version is accepted, as long as the square brackets and the + charge are there.

Does sodium form covalent bonds?

Sodium almost never forms covalent bonds in ordinary compounds. Its electronegativity is very low (0.93), so with non-metals it gives its electron away and makes ionic compounds such as NaCl and Na2O. In sodium metal the atoms are held together by metallic bonding, where outer electrons are shared across the whole lattice rather than in pairs.

What is the difference between a Lewis dot structure and a Lewis structure?

A Lewis dot structure of an atom shows one element's symbol with its valence electrons as dots. A Lewis structure of a molecule shows how several atoms share those electrons, with each shared pair drawn as a line and the leftover electrons as lone-pair dots. You draw atoms first and then combine them, as in the Lewis structure for HCN.

Try it yourself

Open Ions & Ionic Bonding, choose sodium as the metal and chlorine as the non-metal, then press ▶ Watch it. Follow sodium's one outer electron as it moves to chlorine, and check that you end up with [Na]⁺ and [Cl]⁻, just like the dot diagram above. Then swap chlorine for a group 16 non-metal and see how the electron count changes. To see the dots as real electron shells, build sodium in the Atom Builder with 11 protons and 11 electrons.

See it for yourself, in 3D and free.

Try it in the Ions & Ionic Bonding