Sciencedemy
☰✕

What Are Polyatomic Ions? List, Charges and Formulas

What are polyatomic ions? Polyatomic ions are groups of two or more atoms, covalently bonded together, that carry an overall electric charge. Sulfate (SO₄²⁻), nitrate (NO₃⁻), hydroxide (OH⁻) and ammonium (NH₄⁺) are common examples. The group stays together as one unit in reactions and in the formulas of ionic compounds.

What Are Polyatomic Ions? List, Charges and Formulas: Ions & Ionic Bonding: Sodium and chlorine ions as charged clouds packing into a sodium chloride crystal
The Ions & Ionic Bonding in 3D: open it and try this yourself, free.
Try it in the Ions & Ionic Bonding

What makes an ion polyatomic?

A monatomic ion is a single charged atom, such as Na⁺ or Cl⁻. A polyatomic ion is a charged group. Inside the group, the atoms share electrons in covalent bonds, just like in a molecule. The difference is that the whole group has gained or lost electrons, so it has more or fewer electrons than protons.

Take the hydroxide ion, OH⁻. One oxygen and one hydrogen share a pair of electrons, and the group carries one extra electron, giving a charge of 1−. In sodium hydroxide, NaOH, the Na⁺ ion and the OH⁻ ion are held by ionic bonding, while the O–H bond inside the hydroxide stays covalent. A compound containing a polyatomic ion therefore has both kinds of bond. How simple ions form in the first place is explained in how do ions form.

List of polyatomic ions you need to know

This list of polyatomic ions covers the ones that appear most often at GCSE, IGCSE and A level.

Name Formula Charge
Ammonium NH₄⁺ 1+
Hydroxide OH⁻ 1−
Nitrate NO₃⁻ 1−
Nitrite NO₂⁻ 1−
Hydrogencarbonate (bicarbonate) HCO₃⁻ 1−
Acetate (ethanoate) CH₃COO⁻ 1−
Cyanide CN⁻ 1−
Permanganate MnO₄⁻ 1−
Chlorate ClO₃⁻ 1−
Hypochlorite ClO⁻ 1−
Sulfate SO₄²⁻ 2−
Sulfite SO₃²⁻ 2−
Carbonate CO₃²⁻ 2−
Dichromate Cr₂O₇²⁻ 2−
Hydrogenphosphate HPO₄²⁻ 2−
Phosphate PO₄³⁻ 3−

Notice that ammonium is the only common positive one. Almost every other polyatomic ion is negative because it contains oxygen, which pulls in extra electrons.

How do you remember polyatomic ion charges?

Learning polyatomic ion charges is easier with a few patterns rather than memorising each one alone.

  1. "-ate" and "-ite" share a charge. Sulfate SO₄²⁻ and sulfite SO₃²⁻ are both 2−; nitrate NO₃⁻ and nitrite NO₂⁻ are both 1−. The "-ite" ion has one less oxygen.
  2. "Hydrogen" adds one H⁺, so the charge goes up by one. Carbonate CO₃²⁻ becomes hydrogencarbonate HCO₃⁻; phosphate PO₄³⁻ becomes hydrogenphosphate HPO₄²⁻.
  3. "Hypo-" means one less oxygen than "-ite". Chlorite is ClO₂⁻, hypochlorite is ClO⁻, still 1−.
  4. Learn the trio. Nitrate is 1−, sulfate is 2−, phosphate is 3−: "nitrate one, sulfate two, phosphate three".

How do you write formulas with polyatomic ions?

Writing polyatomic ion formulas follows the same rule as any ionic compound: the total positive charge must equal the total negative charge, so the compound is neutral.

  1. Write the two ions with their charges.
  2. Find the smallest numbers of each that make the charges cancel.
  3. If you need more than one polyatomic ion, put it in brackets with the number outside.

Worked examples

Compound Ions Balance the charge Formula
Calcium hydroxide Ca²⁺ and OH⁻ 1 × (2+) = 2 × (1−) Ca(OH)₂
Ammonium sulfate NH₄⁺ and SO₄²⁻ 2 × (1+) = 1 × (2−) (NH₄)₂SO₄
Aluminium nitrate Al³⁺ and NO₃⁻ 1 × (3+) = 3 × (1−) Al(NO₃)₃
Calcium phosphate Ca²⁺ and PO₄³⁻ 3 × (2+) = 2 × (3−) Ca₃(PO₄)₂
Sodium carbonate Na⁺ and CO₃²⁻ 2 × (1+) = 1 × (2−) Na₂CO₃

The brackets matter. Ca(OH)₂ has two oxygens and two hydrogens; CaOH₂ would wrongly mean one oxygen and two hydrogens. No brackets are needed when there is only one of the polyatomic ion, as in Na₂CO₃.

Where do common polyatomic ions show up?

Common polyatomic ions are everywhere in everyday chemistry:

  • Carbonate in limestone and chalk (CaCO₃), which fizzes with acid to release carbon dioxide.
  • Hydrogencarbonate in baking soda (NaHCO₃), the ingredient that makes cakes rise.
  • Nitrate and ammonium in fertilisers such as ammonium nitrate, NH₄NO₃, which contains two different polyatomic ions.
  • Sulfate in copper(II) sulfate, CuSO₄, the blue crystals used in school labs.
  • Hydroxide in alkalis such as sodium hydroxide, which neutralise acids.
  • Phosphate in bones and teeth, which are mostly calcium phosphate.

When you balance an equation that contains these ions, you can often treat the whole ion as one unit if it appears unchanged on both sides, which makes balancing chemical equations much quicker.

Common mistakes

  • Forgetting the brackets. Write Mg(NO₃)₂, not MgNO₃₂.
  • Changing the subscripts inside the ion. SO₄²⁻ is always SO₄; to balance charge you change how many sulfate ions there are, never the 4.
  • Mixing up sulfate and sulfite, or nitrate and nitrite. "-ate" has the extra oxygen.
  • Treating ammonium as a metal. NH₄⁺ behaves like a metal ion in compounds, but it contains no metal at all.
  • Writing the charge in the final formula. (NH₄)₂SO₄ is neutral; charges only appear on separate ions.

Frequently asked questions

What is the difference between a polyatomic ion and a molecule?

A molecule is a neutral group of covalently bonded atoms, such as H₂O or CO₂. A polyatomic ion is also a covalently bonded group, but it carries an overall charge because it has gained or lost electrons. For example, carbon dioxide CO₂ is a molecule, while carbonate CO₃²⁻ is a polyatomic ion with two extra electrons.

Is ammonia a polyatomic ion?

No. Ammonia, NH₃, is a neutral molecule. When it accepts a hydrogen ion (H⁺), for example from an acid, it becomes the ammonium ion, NH₄⁺, which is a polyatomic ion with a charge of 1+. Ammonium is the most common positive polyatomic ion and forms salts such as ammonium chloride, NH₄Cl.

Do compounds with polyatomic ions have ionic or covalent bonds?

They have both. The bonds inside the polyatomic ion are covalent, because the atoms share electrons. The bond between the polyatomic ion and the other ion is ionic, because oppositely charged ions attract. Sodium sulfate, Na₂SO₄, has covalent S–O bonds inside each sulfate ion and ionic bonding between the Na⁺ and SO₄²⁻ ions.

Which polyatomic ions should I memorise first?

Start with the six that appear most in exams: ammonium NH₄⁺, hydroxide OH⁻, nitrate NO₃⁻, carbonate CO₃²⁻, sulfate SO₄²⁻ and phosphate PO₄³⁻. With these you can name most salts made in school practicals. Then add hydrogencarbonate HCO₃⁻ and the "-ite" versions using the patterns for charge and oxygen count.

Try it yourself

Open Ions & Ionic Bonding and watch a metal hand its electrons to a non-metal to make ions. Then write the formula for each compound in the worked examples table above, and check the charges add up to zero before you look at the answer.

See it for yourself, in 3D and free.

Try it in the Ions & Ionic Bonding