Sciencedemy
☰✕

What Is Metallic Bonding? The Sea of Electrons Model

What is metallic bonding? Metallic bonding is the electrostatic attraction between a lattice of positive metal ions and a sea of delocalised electrons that move freely through the whole structure. Each metal atom gives up its outer electrons to this shared pool.

What Is Metallic Bonding? The Sea of Electrons Model: Crystal Lattice Viewer: 3D sodium chloride crystal lattice with purple Na⁺ and green Cl⁻ ions and a colour key
The Crystal Lattice Viewer in 3D: open it and try this yourself, free.
Try it in the Crystal Lattice Viewer

What is the metallic bonding definition?

The standard metallic bonding definition used by GCSE and A-level exam boards is: the strong electrostatic attraction between positive metal ions and delocalised electrons. Three words in that sentence carry the marks:

  • Positive ions. A metal atom loses its outer (valence) electrons and becomes a positive ion, called a cation. Sodium becomes Na⁺, magnesium Mg²⁺, aluminium Al³⁺.
  • Delocalised. The lost electrons do not belong to any single atom. They spread out over the entire piece of metal.
  • Electrostatic attraction. Opposite charges attract. The negative electron sea holds the positive ions together, and the ions hold the sea in place.

The ions sit in a regular, repeating pattern called a giant metallic lattice. It is "giant" because there is no fixed number of atoms: a 1 g copper coin contains about 9.5 × 10²¹ copper ions, all held by the same bond.

What is the sea of delocalised electrons?

The sea of delocalised electrons is the pool of outer electrons that every metal atom contributes to the lattice. Picture rows of positive ions as fixed points, with electrons drifting between them like water around stones. No electron is tied to one ion; any electron can be anywhere in the metal.

How many electrons each atom adds depends on its group:

Metal Group Electrons given to the sea Ion formed
Sodium 1 1 Na⁺
Magnesium 2 2 Mg²⁺
Aluminium 13 3 Al³⁺

This is why metals sit on the left of the periodic table: their atoms have few outer electrons and low ionisation energies, so they give them up easily. See where they all are in metals on the periodic table.

Why does metallic bonding explain the properties of metals?

Almost all the properties of metallic bonding trace back to the free electrons and the non-directional bond.

Electrical conductivity

The delocalised electrons are charged and free to move. Connect a battery and they drift towards the positive terminal, carrying a current. Copper conducts so well (about 6 × 10⁷ siemens per metre) that it is used for almost all household wiring.

Thermal conductivity

Free electrons also carry kinetic energy quickly from a hot region to a cold one, which is why a metal spoon in hot tea warms up faster than a wooden one.

Malleability and ductility

Malleable means it can be hammered into shape; ductile means it can be drawn into wire. The metallic bond has no fixed direction, so when a force pushes one layer of ions past another, the electron sea simply flows with them and the attraction is never broken. Compare this with an ionic crystal, where shifting a layer lines up like charges and the crystal shatters, as explained in giant ionic lattice structure.

High melting and boiling points

Melting means overcoming the attraction between the ions and the sea across the whole giant lattice. That takes a lot of energy, so most metals melt high: iron at 1538 °C, tungsten at 3422 °C.

Shine (lustre)

Free electrons absorb and re-emit visible light at the surface, giving metals their shine.

What affects the strength of metallic bonding?

The strength of metallic bonding depends on how strongly the ions and electrons attract. Two factors control it:

  1. Charge on the ion (number of delocalised electrons). More electrons per atom means a denser electron sea and a higher ionic charge, so a stronger bond.
  2. Size of the ion. Smaller ions let the electron sea get closer to the nucleus, so the attraction is stronger.

You can see both trends in the melting points of period 3:

Metal Ion Delocalised electrons per atom Melting point
Sodium Na⁺ 1 98 °C
Magnesium Mg²⁺ 2 650 °C
Aluminium Al³⁺ 3 660 °C

Going down group 1 the ions get bigger, so the bonding gets weaker: lithium melts at 181 °C, sodium at 98 °C and caesium at just 28 °C. The trend is covered in alkali metals on the periodic table.

How is metallic bonding different from ionic and covalent bonding?

Metallic Ionic Covalent
Between Metal atoms Metal and non-metal Non-metal atoms
Electrons Delocalised over the lattice Transferred Shared in pairs
Conducts as a solid? Yes No No (except graphite)
Bends or shatters? Bends Shatters Varies

The full comparison of the other two is in ionic vs covalent bonds.

Why are alloys harder than pure metals?

An alloy is a mixture of a metal with another element, such as steel (iron with up to about 2% carbon) or brass (copper and zinc). The added atoms are a different size, so they disrupt the neat layers of ions. Layers can no longer slide easily, which makes the alloy harder and stronger than the pure metal, while it still conducts because the electron sea is still there.

Common mistakes

  • Saying metals contain "free atoms". It is the electrons that are free; the ions stay in fixed lattice positions and only vibrate.
  • Calling it attraction between atoms. The bond is between positive ions and electrons, not between neutral atoms.
  • Saying the electrons "carry heat because they are hot". They transfer kinetic energy through collisions; temperature belongs to the whole metal.
  • Forgetting the word "delocalised". Many mark schemes require it for the mark.
  • Thinking all metals melt high. Mercury is liquid at room temperature (−39 °C) and caesium melts in a warm hand.

Frequently asked questions

Why do metals conduct electricity?

Metals conduct electricity because their outer electrons are delocalised: they are not held by any single ion and can move through the whole lattice. When a voltage is applied, these free electrons drift towards the positive terminal and carry charge through the metal. Solid ionic compounds cannot do this because their ions are locked in place and they have no free electrons.

Is metallic bonding strong or weak?

Metallic bonding is generally strong, which is why most metals are solids with high melting points, such as iron at 1538 °C. Its strength varies, though. Metals that give more electrons to the sea and have small ions, like aluminium, bond more strongly than metals with one electron and large ions, like caesium, which melts at only 28 °C.

What is the difference between metallic and ionic bonding?

In ionic bonding, a metal transfers electrons to a non-metal, making positive and negative ions that attract in a fixed lattice. In metallic bonding, metal atoms share their outer electrons in a delocalised sea around positive ions, with no negative ions at all. That is why metals conduct as solids and bend, while ionic solids do not conduct and shatter.

Why are metals malleable?

Metals are malleable because the metallic bond has no fixed direction. The positive ions are arranged in layers, and when a force is applied the layers slide over one another. The sea of delocalised electrons moves with them, so the attraction holding the metal together is never broken, and the metal changes shape instead of cracking.

Try it yourself

Open the Crystal Lattice Viewer and choose copper. Look at the regular layers of positive ions, then hit it with the hammer: the layers slide and the metal bends. Now switch to NaCl and hit that too. The ionic crystal shatters, which is the difference metallic bonding makes.

See it for yourself, in 3D and free.

Try it in the Crystal Lattice Viewer