What Is Lattice Energy? Definition, Trend & Born-Haber
What is lattice energy? Lattice energy is the energy released when one mole of an ionic solid forms from its separate gaseous ions. For sodium chloride, Na⁺(g) + Cl⁻(g) → NaCl(s) releases about 787 kJ/mol. The bigger the number, the stronger the ionic bonding and the harder it is to pull the crystal apart.

How is lattice energy defined?
There are two conventions, and exam boards differ, so check which yours uses.
- Formation: the energy released when gaseous ions form 1 mol of solid. It is exothermic, so the value is negative (−787 kJ/mol for NaCl).
- Dissociation: the energy needed to break 1 mol of solid into gaseous ions. It is endothermic, so the value is positive (+787 kJ/mol for NaCl).
Same size, opposite sign. This article quotes the size and says which direction we mean. The idea only makes sense for a giant ionic lattice, where every ion is held by several neighbours of opposite charge, as shown in giant ionic lattice structure.
What affects the size of lattice energy?
Lattice energy comes from the attraction between oppositely charged ions, which follows Coulomb's law. The attraction is roughly proportional to
(charge of cation × charge of anion) ÷ distance between the ion centres
So two things control it:
- Ionic charge. Doubling a charge roughly doubles the attraction.
- Ionic radius. Small ions sit closer together, so the distance is shorter and the attraction is stronger.
What is the lattice energy trend?
The lattice energy trend is easiest to see in a table. Values are approximate and come from standard data tables, so a different book may differ by a few kJ/mol.
| Compound | Ion charges | Approx. lattice energy (kJ/mol) |
|---|---|---|
| CsCl | +1, −1 | 657 |
| KCl | +1, −1 | 715 |
| NaCl | +1, −1 | 787 |
| NaF | +1, −1 | 923 |
| LiF | +1, −1 | 1037 |
| CaO | +2, −2 | 3414 |
| MgO | +2, −2 | 3791 |
Why is MgO so much higher than NaCl?
Mg²⁺ and O²⁻ each carry a 2 charge, so the charge product is 4 compared with 1 for Na⁺ and Cl⁻. The ions are also smaller and closer together. The result is nearly five times the lattice energy. This is the reason magnesium oxide melts at about 2852 °C while sodium chloride melts at 801 °C.
Why does lattice energy fall down a group?
Compare LiF, NaF, then KCl and CsCl. Going down Group 1 the cation gets bigger (Li⁺ about 76 pm, Na⁺ about 102 pm, Cs⁺ about 167 pm), the ions sit further apart and the attraction weakens. For the same reason fluorides have higher lattice energies than chlorides, bromides and iodides of the same metal. For more on size trends see the atomic radius trend.
What is the lattice energy of NaCl?
The lattice energy of NaCl is about 787 kJ/mol (−787 kJ/mol if written as formation). You cannot measure it directly, because making gaseous ions and bringing them together is not something you can do in a flask. Instead it is found with a Born-Haber cycle, which applies Hess's law to steps that can be measured.
How does a Born-Haber cycle work?
A Born-Haber cycle is an energy diagram that links the enthalpy of formation of an ionic compound to the steps of making its gaseous ions and joining them. Because enthalpy is a state function, the route does not matter: the sum of the steps equals the formation enthalpy.
Worked example: sodium chloride
All values are in kJ/mol.
| Step | Equation | ΔH |
|---|---|---|
| Atomisation of sodium | Na(s) → Na(g) | +107 |
| First ionisation energy of sodium | Na(g) → Na⁺(g) + e⁻ | +496 |
| Atomisation of chlorine | ½Cl₂(g) → Cl(g) | +122 |
| Electron affinity of chlorine | Cl(g) + e⁻ → Cl⁻(g) | −349 |
| Lattice energy (formation) | Na⁺(g) + Cl⁻(g) → NaCl(s) | ? |
| Enthalpy of formation | Na(s) + ½Cl₂(g) → NaCl(s) | −411 |
Add the first four steps: 107 + 496 + 122 − 349 = +376.
The total must equal −411, so lattice energy = −411 − 376 = −787 kJ/mol. That matches the figure above. Notice that making the ions costs energy (+376). The compound only forms because the lattice energy repays it with a much larger release. See ionisation energy and electron affinity for the two electron steps.
Does lattice energy explain melting point and solubility?
Partly. A higher lattice energy means a stronger lattice, so it usually means a higher melting point and a harder, more brittle solid. Solubility is a balance: dissolving in water must pay back the lattice energy with the hydration energy of the ions. Highly charged small ions have large lattice energies but also large hydration energies, so the answer is not always simple.
How is lattice energy different from bond energy?
Bond energy is the energy to break a covalent bond between two atoms in a molecule. Lattice energy involves a whole crystal of ions and electrostatic attraction in every direction. The two are not interchangeable, which is the main difference between ionic and covalent bonds.
Common mistakes
- Forgetting the sign convention. State whether you mean formation (negative) or dissociation (positive).
- Using ions in the solid state. Lattice energy starts from gaseous ions.
- Mixing up atomisation and ionisation. Atomisation makes gaseous atoms; ionisation removes an electron from them.
- Using the full Cl₂ bond energy. One chlorine atom needs ½Cl₂, so the step is half the bond energy of Cl₂.
- Comparing ions of different charge as if size alone decides. Charge usually matters more.
Frequently asked questions
Is lattice energy positive or negative?
It depends on the definition. If lattice energy is the energy released when gaseous ions form a solid, it is negative (exothermic), for example −787 kJ/mol for NaCl. If it is defined as the energy needed to break the solid into gaseous ions, it is positive, +787 kJ/mol. The magnitude is the same, so always check which direction your course uses.
Which has higher lattice energy, NaCl or MgO?
MgO has a much higher lattice energy, about 3791 kJ/mol compared with 787 kJ/mol for NaCl. Mg²⁺ and O²⁻ carry double charges and are smaller than many singly charged ions, so the electrostatic attraction between them is far stronger. This also explains why MgO has a far higher melting point and is used to line furnaces.
How to compare lattice energies quickly?
Look at charges first, then size. A compound with 2+ and 2− ions beats one with 1+ and 1−. If the charges match, the compound with the smaller ions has the higher lattice energy. So LiF is higher than NaF, which is higher than NaCl, which is higher than KCl.
Why can't lattice energy be measured directly?
Because it describes gaseous ions coming together to form a solid, which cannot be done and monitored in a lab. Instead, chemists measure the other steps (formation enthalpy, atomisation, ionisation energy, electron affinity) and use a Born-Haber cycle with Hess's law to calculate it. Theoretical values from Coulomb-type equations are also used for comparison.
Try it yourself
Open the Crystal Lattice Viewer, choose sodium chloride and rotate it to see each ion surrounded by six of the opposite charge. Then use the Ions & Ionic Bonding tool to watch sodium hand over an electron to chlorine, and think about which step in the Born-Haber cycle you are looking at.
See it for yourself, in 3D and free.
Try it in the Crystal Lattice Viewer